PENOSIL
Premium Gunfoam Winter professional PU-foam for winter

VALUES

• High thermal and sound insulation.
• Thick and even structure.
• Low post-expansion.
• Very good adherence on various building materials.
• High-quality result under various weather conditions.
• Application with foam gun.

USAGE INSTRUCTIONS

Hold the foam can in upright position and turn the gun side by holding the gun handle with one hand and turn the can with the other hand.

Make sure that the gun is not pointed to at other persons when turning it.

The can must not be screwed the gun with the valve upside down or by turning the gun on the can.

After fixing the gun, shake the can well at least 20 times and turn into application position.

The foam output can be adjusted by gun trigger.

TIPS

• A previously moistened surface ensures faster curing of the foam and a better result.
• At low temperatures the foam can must be warmed before work. The temperature of the warming room or water must not exceed +30°C.
• Air temperature during application -10°C to +30°C, best results at +20°C.
• Can temperature during application +5°C to +25°C, best results at +20°C.
• The surfaces must be clean from dust, loose particles and oil.

LIMITATIONS

• Cured foam is sensitive to UV radiation and needs to be covered.
• Do not use on surfaces that are in constant contact with water.
• Insulation foam does not adhere to polyethylene (PE), PTFE (Teflon®) or silicone surfaces.