PENOSIL
Premium neutrální silikon

VALUES

• Insulates and seals in both indoor and outdoor conditions.
• Suitable for slightly alkaline metal surfaces.
• Non-sagging, does not spread in the joint.
• Adheres to most building materials, such as: stone, metal and wood materials, glass and plastic surfaces.
• Adheres well to porous surfaces.

• Excellent processing and smoothing properties.
• Allows long working periods.
• After curing, elastic even at extreme temperatures (-40 °C to +100 °C). Mould, UV, moisture and weather resistant.
• Long storage time.
• Does not lose volume during the curing process.

USAGE INSTRUCTIONS

310 ml cartridge:

Cut off the threaded end of the cartridge and screw on the application nozzle for directing the silicone.

Cut the threaded end in a way where a suitable opening for application is produced.

Place the cartridge together with the applicator in the silicone gun and fill the installation nozzle with silicone by repeatedly pressing the gun trigger.

Fill the joint by evenly pressing on gun trigger and dragging the nozzle along the joint.

After application of the silicone, smoothen the upper surface by a rubber silicone scraper and remove the excess material.

600 ml foil package:

Open the application nozzle of the gun, insert the package in the gun and open on the applicator side by removing the fastening clamp.

Place the applicator nozzle on the opened end and screw on the cap.

Apply silicone in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle along the joint.

After application, smooth the silicone surface with a rubber silicone scraper and remove the excess material.

TIPS

• The surfaces must be clean from fat, oil, dust and loose particles.
• The surface to be covered must be dry.
• Ensure adequate ventilation in all joint locations.
• During the curing process, make sure that no impurities can settle on the surface and that the joint surface is not affected by mechanical load.
• Do not use at temperatures below +5 °C.

LIMITATIONS

• Do not use for sealing aquariums and underwater joints.
• Cannot be painted.