PENOSIL
Max Gap výplňová pěna

VALUES

• Maximum expansion to fill large gaps and voids.
• Takes the shape of cracks and voids, forming a permanent airtight bond.
• Very good adherence on various building materials.

• Easy to use with delivered straw applicator.
• Cured foam is a good temperature and sound insulator.

USAGE INSTRUCTION

Hold the foam can in upright position.

Screw the applicator (straw) to the foam can valve.

Shake the can at least 20 times before use.

For application, turn the applicator upside down and press the applicator trigger.

The foam output can be adjusted by applicator trigger.

TIPS

• A previously moistened surface ensures faster curing of the foam and a better result.
• At low temperatures the foam can must be warmed before work. The temperature of the warming room or water must not exceed 30°C.
• Air temperature during application -10°C to +30°C, best results at +20°C.
• Can temperature during application +10°C to +25°C, best results at +20°C.
• The surfaces must be clean from dust, loose particles and oil.

LIMITATIONS

• Cured foam is sensitive to UV radiation and needs to be covered.
• Do not use on surfaces that are in constant contact with water.
• Insulation foam does not adhere to polyethylene (PE), PTFE (Teflon®) or silicone surfaces.