PENOSIL
Akrylový štukový tmel Premium

VALUES

• Forms grey grainy stucco-like surface
• Acrylic-based low-odour formula, free of solvents, isocyanate and silicone
• After curing can be painted
• UV, weather and ageing resistant
• Easy to apply and process
• Adheres well to most substrates

USAGE INSTRUCTION

Cut off the threaded end of the cartridge and screw on the application nozzle for directing the filler. Cut the threaded end in a way where a suitable opening for application is produced.

Place the cartridge together with the applicator in the gun and fill the installation nozzle with the filler by repeatedly pressing the gun trigger.

Apply filler in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle continuously along the joint.

After applying the filler, smoothen it with a rubber scraper. Remove excess sealant.

TIPS

• Application temperature from +5 °C to +40 °C. The surfaces must be clean from fat, oil, dust and loose particles. The surface to be covered must be dry. The product cures by means of desiccation (water evaporation). High humidity, low temperatures and high joint depth can delay skin formation and curing significantly.
• Paintable after the final curing. Curing time depends on the size of the joint. Early painting may cause cracking of the paint. Ensure adequate ventilation in all joint locations.
• During the curing process, make sure that no impurities can settle on the surface and that the joint surface is not affected by mechanical load.
• Do not use at temperatures below +5 °C.

LIMITATIONS

• Not suitable in connection with bituminous or tar containing substrates, and to materials that bleed oils or plasticizers.
• Not suitable for use in damp or wet conditions or if rain is imminent.
• Does not adhere to PE, PP, PTFE (Teflon®).
• Not suitable in contact with untreated metals (oxidation risk).
• Not suitable for joints with movement more than 7,5% of the joint width.
• If applied outdoors, the joint must be protected from driving rain and continuous exposure to moisture/water.