PENOSIL
Lepidlo pro lepení polystyrenu StyroFix 615 Premium

VALUES

• Adheres well to most construction and finishing materials.
• Can be used on moist surfaces, however, conditions for quick drying should be established.
• Paintable over with dispersion paints.
• UV and moisture proof.

USAGE INSTRUCTIONS

Cut off the threaded end of the cartridge and screw on the application nozzle for directing adhesive. Cut the threaded end in a way where a suitable opening for application is produced.

Place the cartridge together with the applicator in the gun and fill the installation nozzle with adhesive by repeatedly pressing the gun trigger.

Apply the adhesive to the surface to be connected and immediately press to the substrate.

When gluing heavy plates, apply adhesive on both surfaces and use a trowel similar to the one designed for applying tile adhesive. Press the surfaces together and support them before the adhesive starts to cure. Lighter elements should be supported for 2-3 hours, heavy and hanging elements until final curing (curing speed 2.5mm/24h).

Protect the adhesive against moisture and ensure a good ventilation during the curing period.

TIPS

• Usage temperature between +5 °C and +30 °C.
• The surfaces must be clean from dust, loose particles and oil.
• Good ventilation is required for the removal of moisture released during curing.

LIMITATIONS

• Elements will have a rigid connection, which is why the adhesion is not suitable for moving connections.
• Not suitable for surfaces in permanent contact with water.
• Curing may slow down when the connected surfaces are non-porous.