Your location and language
Global
Brazil
Czech Republic
Estonia
Finland
France
Germany
Kazakstan
Latvia
Lithuania
Poland
Portugal
Romania
Spain
Ukraine
United Kingdom
United States
Uzbekistan
Total price: 0 €
Select quantity
Total price:
310 ml plastic cartridge, 12 cartridges per box
Cut open the threaded end of the cartridge and screw on the installation nozzle to direct the flow of the adhesive. Cut the nozzle so that the hole is sufficient for application of the necessary amount of adhesive.
Place the cartridge with the nozzle into the gun and pump the adhesive mass into the nozzle by repeatedly pressing the gun trigger.
If you are dealing with a clean installation joint, apply painter’s tape before putting the element in place. Remove the tape before the adhesive dries completely. The SpeedFix Mirror 936 adhesive can be used as a contact glue or single-side wet glue.
Single-side wet bonding
Apply the adhesive to one of the surfaces to be bonded and immediately press the surfaces together firmly to achieve the best result.
Fasten the bonded surfaces to each other tightly. They should remain mechanically supported for at least 2 hours, but the recommended duration is until the adhesive becomes completely dry. Avoid any thermal, mechanical or chemical impact before the adhesive cures completely.
Contact bonding
Apply the adhesive to one of the surfaces to be bonded, press the surfaces together firmly and then immediately separate them.
Keep the surfaces separated for 3-5 minutes and then press them together again to complete the bonding process. The surfaces must be pressed together firmly and supported to ensure maximum contact. They should remain mechanically supported for at least 2 hours, but the recommended duration is until the adhesive becomes completely dry.
Avoid any thermal, mechanical or chemical impact before the adhesive cures completely.
Zostaniesz przekierowany na stronę należącą do Plonmar Sp.z.o.o., wyłącznego przedstawiciela marki PENOSIL w Polsce.
Wolf Group OÜ nie ponosi odpowiedzialności za informacje zamieszczone na tej stronie.
Jeśli chcesz pozostać na oficjalnej wersji strony internetowej Wolf Group OÜ, producenta produktów marki PENOSIL, wybierz opcję Global (in English) w menu.
You are being redirected to a website of GC "Plonmar Sp.z.o.o." - the exclusive representative of PENOSIL trademark in the Poland.
Wolf Group OÜ disclaims any liability for the information posted on this website.
If you want to stay on the Russian language version of the website of Wolf Group OÜ - the manufacturer of the products under PENOSIL trademark, please select Global (in English) in the menu.
