PENOSIL
Premium Building Silicone

VALUES

• Fills and seals.
• For indoor and outdoor works.
• With high movement (±25%) and low elastic modulus.
• Easy to process and smooth.
• Adheres well to many porous and non-porous surfaces.
• Does not cause corrosion on metals.

• Suitable for sealing surfaces that come into contact with food.
• Resistant to UV radiation, various weather condition and ageing.
• Does not lose volume during the curing process.
• Permanently elastic.

USAGE INSTRUCTIONS

310 ml cartridge:

Cut off the threaded end of the cartridge and screw on the application nozzle for directing the silicone.

Cut the threaded end under an angle of 45° in a way where a suitable opening for application is produced.

Place the cartridge together with the applicator in the gun and fill the installation nozzle with silicone by repeatedly pressing the gun trigger.

Apply silicone in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle continuously along the joint.

After application of the silicone, smooth it with a rubber silicone scraper and remove the excess material.

600 ml foil package:

Open the application nozzle of the gun, insert the package in the gun and open on the applicator side by removing the fastening clamp.

Place the applicator nozzle on the opened end and screw on the cap.

Apply silicone in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle along the joint.

After application, smooth the silicone surface with a rubber silicone scraper and remove the excess material.

Weathersealing manual

TIPS

• The surfaces to be bonded must be free of grease, oil, dust and loose particles. The surface to be covered must be dry.
• Ensure sufficient ventilation in all jointed locations.
• During curing, make sure no dirt falls on the material’s surface and that the surface of the joint is not under mechanical stress.
• Do not use at temperatures below +5 °C. Due to the abundance of materials, we recommend testing the suitability and adhesion of the product before use.
• If necessary, use a primer to improve adhesion.
• Clean uncured sealant using PENOSIL Premium Cleaning Wipes.
• Cured sealant mechanically using PENOSIL Premium Silicone Remover to soften the sealant.

LIMITATIONS

• Not suitable for surfaces containing bitumen or on construction materials that may emit oils, plasticisers or solvents (e.g. natural or synthetic rubber, chloroprene, EPDM rubber, etc.)
• Not recommended for natural stone, e.g. marble and granite.
• Do not use for sealing aquariums and underwater joints.
• Does not adhere to polyethylene (PE), polypropylene (PP), PTFE (Teflon®) or Plexiglas (PMMA). Not suitable for use as structural glazing glue. Not paintable.