PENOSIL
Premium Elastic Gunfoam

VALUES

• Elastic, easily compressible, restores its original shape after being compressed.
• Due to especially low expansion pressure very suitable for using in fragile constructions.
• Fast curing.

• Allows accurate dosage and economic usage.
• Withstands vibration well.
• Adheres well to various construction materials.
• Can be used with a foam gun.

USAGE INSTRUCTIONS

Hold the foam can in an upright position, turn the gun to the canister by holding the gun handle with one hand, and turn the canister with the other hand.

Make sure that the gun is not pointed to at other persons when turning it.

The canister must not be screwed to the gun with the valve upside down or by turning the gun on the canister.

After fixing the gun, shake the canister well at least 20 times and turn into working position.

The foam output can be adjusted using the gun trigger.

TIPS

• A previously moistened surface ensures faster curing of the foam and a better result.
• At low temperatures the foam can must be warmed before work. The temperature of the warming room or water must not exceed +30°C.
• Air temperature during application -5°C to +30°C, best results at +20°C.
• Can temperature during application +5°C to +25°C, best results at +20°C.
• The surfaces must be clean from dust, loose particles and oil.

LIMITATIONS

• Cured foam is sensitive to UV radiation and needs to be covered.
• Do not use on surfaces that are in constant contact with water.
• Insulation foam does not adhere to polyethylene (PE), PTFE (Teflon®) or silicone surfaces.