PENOSIL
Premium FireStop Silicone

VALUES

• Withstands fire up to 4 hours
• Elastic, movement capability ±25%.
• Solvent and asbestos free.

• Ageing, UV and weather-proof.
• Suitable for slightly alkaline and metallic surfaces, does not cause corrosion.

USAGE INSTRUCTIONS

Cut off the threaded end of the cartridge and screw on the application nozzle for directing the silicone.

Cut the threaded end in a way so that a suitable opening for application is produced.

Place the cartridge together with the applicator in the gun and fill the installation nozzle with silicone by pressing the gun’s trigger.

Apply silicone in the joint by repeatedly and evenly pressing the gun’s trigger and smoothly dragging the nozzle continuously along the joint.

After applying the sealant, smoothen it with a rubber scraper.

Remove excess material.

TIPS

• The surfaces must be clean from fat, oil, dust, old sealant, and loose particles.
• The surface to be covered must be dry.
• Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth.
• Solvent rests should be removed before evaporating with a clean cloth.
• Usage temperature between +5°C and +40°C.
• The application temperature of the sealant must be between +20°C and +25°C.

LIMITATIONS

• Do not use in contact with natural stones such as marble, granite, quartzite, as it may cause stains.
• May discolour in contact with some plastics such as EPDM and neoprene.