PENOSIL
Premium Neutral Sanitary Silicone

VALUES

• Mould, UV, and moisture resistant.
• Non-sagging, does not spread in the joint.
• After curing, elastic even at extreme temperatures (-40 °C to +100 °C).
• Low odour level.
• Adheres to most building materials, such as: stone, metal and wood materials, glass and plastic surfaces.

• Adheres well to porous surfaces.
• Excellent processing and smoothing properties.
• Suitable for use on metallic surfaces and alkaline materials, such as: concrete, mortar and asbestos cement.
• Long storage time.
• Does not lose volume during the curing process.

USAGE INSTRUCTIONS

Cut off the threaded end of the cartridge and screw on the application nozzle for directing the silicone.

Cut the threaded end under an angle of 45° in a way where a suitable opening for application is produced.

Place the cartridge together with the applicator in the gun and fill the installation nozzle with silicone by repeatedly pressing the gun trigger.

Apply silicone in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle continuously along the joint.

After application of the silicone, smooth it with a rubber silicone scraper and remove the excess material.

Sanitary Sealing Manual

TIPS

• The surfaces must be clean from fat, oil, dust and loose particles.
• The surface to be covered must be dry.
• Ensure adequate ventilation in all joint locations.
• During the curing process, make sure that no impurities can settle on the surface and that the joint surface is not affected by mechanical load.
• Do not use at temperatures below +5 °C.

LIMITATIONS

• Do not use for sealing aquariums and underwater joints.
• Do not use as glass adhesive during facade works.
• In contact with natural stones, such as: marble, granite, quartzite may cause stains.
• Cannot be painted.