PENOSIL
Premium SpeedFix All Exterior 777 adhesive for use outdoors

VALUES

• Does not cause corrosion on metals.
• Does not shrink during drying.
• Good antivibration and noise suppressive properties.
• UV and weather resistant.

• Can be painted over.
• Can be also used indoors.
• Does not contain harmful ingredients.
• For general construction works where a particularly fast primary bond and a strong connection are required.

USAGE INSTRUCTIONS

Cut open the threaded end of the cartridge and screw on the installation nozzle to direct the flow of the adhesive.

Cut the nozzle so that the hole is sufficient for application of the necessary amount of adhesive.

Place the cartridge with the nozzle into the gun and pump the adhesive mass into the nozzle by repeatedly pressing the gun trigger.

Apply the adhesive mass to the surface and press immediately to the base surface. Mounted components require support for at least 2 hours, sensitive parts up to final curing (curing rate 3 mm/24 h).

TIPS

• Application temperature range: from +5 °C to +40 °C.
• The surfaces to be bonded must be free of grease, oil, dust, and loose particles.
• Test the adhesion of the adhesive on the substrate before use in order to make sure that the product is suitable for the intended purpose.
• To remove adhesive that is not yet cured you can use PENOSIL Premium Cleaning Wipes or an organic solvent, for example petroleum spirits (White Spirit) or acetone. Cured adhesive can be removed mechanically.

LIMITATIONS

• Do not use for sealing aquariums and underwater joints.
• In case of natural stone, testing must be performed before use.