PENOSIL
Premium WoodFix PVA D3 647 moisture-resistant wood adhesive

VALUES

• Moisture resistance D3 pursuant to DIN EN204/205
• Quick and strong adhesion. Adhesive joint is stronger than the wood itself.
• In addition to wood, glues well cardboard, leather, textile, porcelain, bricks, concrete, metal, plaster board.
• After drying becomes semitransparent and solid.
• Indispensable in furniture industry.

USAGE INSTRUCTIONS

Cut the tip of the cap so that a suitable opening for application is produced.

Apply the adhesive in a thin layer to one of the surfaces to be glued.

Seal the bottle opening with a button in the lower part of the cap in order to not let the glue dry. In 10 minutes at the latest press the surfaces to be connected together and place under press for 10 to 30 minutes depending on the material.

In case of harder wood surfaces and coniferous wood (oak, birch), the glue should be applied to both surfaces and held under pressure for a longer time (up to 50 min).

TIPS

• Usage temperature between +15 °C and +25 °C.
• The surfaces must be clean from dust, loose particles and oil.
• Good ventilation is required for the removal of moisture separating during curing.
• Humidity content of the adherent wood must be 8-12%.

LIMITATION

• Elements will have a rigid connection, which is why the adhesion is not suitable for moving connections.
• Not suitable for surfaces in permanent contact with water.