Shopping cart

Your cart is currently empty.

Total price:  0 €

Go to checkout
Home
Solutions selection
Solutions
Sanitary solution
Priming, hydroisolating and waterproofing the subsurfaces

Priming, hydroisolating and waterproofing the subsurfaces

When building or renovating damp rooms special hydro insulation products must be used to avoid moisture penetration into structures and generation of mould. Hydro insulation products are applied straight on the floor or wall (i.e., on stone, concrete, waterproof veneer, or other substrate) under the finishing layer (i.e., ceramic tiles, paint, coverings, etc.).

1 2 3 4

1

Priming and strengthening the subsurfaces

2

Moisture barrier for humid areas

3

Waterproofing wet areas before tiling

4

Reinforcing corners, junctions and cut-throughs during waterproofing

Priming and strengthening the subsurfaces

Premium BetPrimer bonding dispersion for priming concrete surfaces

View product details

Priming, hydroisolating and waterproofing the subsurfaces

0.00 € / pc
Product description

When building or renovating damp rooms special hydro insulation products must be used to avoid moisture penetration into structures and generation of mould. Hydro insulation products are applied straight on the floor or wall (i.e., on stone, concrete, waterproof veneer, or other substrate) under the finishing layer (i.e., ceramic tiles, paint, coverings, etc.).

Colour

Select quantity

-
+
Add to my listRemove from my list
Add to my list

Total price:

Where to buy

Bonding dispersion for priming.

  • Ensures strong bond between substructure and coating.
  • Can be used on concrete, mortar, brick, stone and gypsum surfaces.
  • Water-based, no odour or hazardous compounds to ensure simple, quick and safe use.

Moisture barrier for humid areas

Premium HydroStop the moisture barrier for humid rooms

View product details

Priming, hydroisolating and waterproofing the subsurfaces

0.00 € / pc
Product description

When building or renovating damp rooms special hydro insulation products must be used to avoid moisture penetration into structures and generation of mould. Hydro insulation products are applied straight on the floor or wall (i.e., on stone, concrete, waterproof veneer, or other substrate) under the finishing layer (i.e., ceramic tiles, paint, coverings, etc.).

Colour

Select quantity

-
+
Add to my listRemove from my list
Add to my list

Total price:

Where to buy

Liquid coating for humid room walls and ceiling to prevent moisture from permeating building structures.

  • Forms a protective layer on the surface against moisture to protect the walls and ceilings against dampness before installing ceramic tiles, painting or other finishing.
  • Water-based, does not smell or emit harmful compounds.
  • Can be used to protect substrates like gypsum board, concrete, plaster or brick.

Waterproofing wet areas before tiling

Premium AquaBrake Fiber waterproofing compound

View product details

Priming, hydroisolating and waterproofing the subsurfaces

0.00 € / pc
Product description

When building or renovating damp rooms special hydro insulation products must be used to avoid moisture penetration into structures and generation of mould. Hydro insulation products are applied straight on the floor or wall (i.e., on stone, concrete, waterproof veneer, or other substrate) under the finishing layer (i.e., ceramic tiles, paint, coverings, etc.).

Colour

Select quantity

-
+
Add to my listRemove from my list
Add to my list

Total price:

Where to buy

Fiber-reinforced ready-to-use water-based compound for waterproofing the substrate under the floors and walls of wet rooms.

  • Completely watertight after curing to protect the structures of buildings from harmful impact caused by water.
  • Reinforced with fibers to bridge cracks up to 1.5mm wide in the substrate.
  • A colour change indicates drying to start the different stages of the work in time.

Tested according to EN 14891.

Reinforcing corners, junctions and cut-throughs during waterproofing

Premium AquaBrake Fabric reinforcement fabric used with waterproofing mastic

View product details

Priming, hydroisolating and waterproofing the subsurfaces

From

0.00 € / pc
Product description

When building or renovating damp rooms special hydro insulation products must be used to avoid moisture penetration into structures and generation of mould. Hydro insulation products are applied straight on the floor or wall (i.e., on stone, concrete, waterproof veneer, or other substrate) under the finishing layer (i.e., ceramic tiles, paint, coverings, etc.).

Colour

Select quantity

-
+

Total price:

Add to my listRemove from my list
Add to my list
Where to buy

Reinforcement fabric to enhance the effect of waterproof sealants and mastics.

  • Reinforces corners, floor and wall junctions and cut-throughs when using waterproofing mastic.
  • Resistant to ageing, tearing and chemicals.
  • Easy to cut suitable pieces.