PENOSIL
Premium Bitum Sealant for roof

VALUES

• Touch-dries quickly.
• Instantly rain and ice resistant.
• Suitable on bituminous materials, alkali and metals.
• Usable on damp surfaces.

• Melting temperature over 100°C.
• Will not become brittle in cold.
• Can also be used in vertical joints.
• Dissolved acid, alkali, emission and weather resistant.
• High tensile strength.

USAGE INSTRUCTION

Cut off the threaded end of the cartridge and screw on the application nozzle for directing the sealant.

Cut the threaded end in a way so that a suitable opening for application is produced.

Place the cartridge together with the applicator in the gun and fill the installation nozzle with sealant by pressing the gun’s trigger.

Apply sealant in the joint by repeatedly and evenly pressing the gun’s trigger and smoothly dragging the nozzle continuously along the joint.

After applying the sealant, smoothen it with a rubber acrylic scraper.

Remove excess silicone.

TIPS

• The surfaces must be free from fat, oil, dust and loose particles.
• The surface to be covered must be dry.
• Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth.
• Solvent rests should be removed before evaporating with a clean cloth.
• Ensure adequate ventilation in all joint locations.

Limitations

• During the curing process, make sure that no impurities can settle on the surface and that the joint surface is not affected by mechanical load.
• Product temperature during use +5°C to +30°C.
• Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth.
• Solvent rests should be removed before evaporating with a clean cloth.