PENOSIL
Premium DustProofer chemical reinforcement and dust-proofing agent

VALUES

• Makes concrete surfaces dust-repellent and wear-resistant.
• Gives concrete surface resistance to effects of water, oil and chemicals (alkalis and acids).
• Reacts with concrete, thereby rendering the top layer evenly sealed.
• Preserves the breathability of concrete.

USAGE INSTRUCTION

The surface is treated in three stages:
1. Mix 1 part of the chemical with 2 parts of water (1:2) and apply to the concrete surface using a soft brush. The solution must be applied to the surface generously to enable the deepest possible penetration into the concrete. Let the surface dry for 40–60 min. and then remove the superfluous solution with a cloth.
2. Mix the chemical with water 1:1 and apply to the concrete surface as previously. Let the surface dry for 40–60 min. and then remove the superfluous solution.
3. Mix 2 parts of the chemical with 1 part of water (2:1) and apply the mixture to the concrete surface as in the previous stages. Let the surface dry for 40–60 min. and then remove the superfluous solution. Full cure is 24 hours.

TIPS

• The surface must be cleaned and dust removed with a vacuum cleaner.
• To prevent streaks remaining on the surface, it is especially important to remove all solution that has not penetrated into the surface. Otherwise, spots may appear on the surface. If white active substance seeps from the concrete after coating, Step 3 needs to be repeated to remove any blotches. NB! The three stages of surface treatment must be performed one after another as described
  above.
• When treating the surface in three stages, the product consumption is up to 0,5 l/m².
  Treated surface must cure for at least 24 hours before use.