PENOSIL
Premium FastFix Epoxy Metal expoxy putty for repairing metal surfaces

VALUES

• Hand mixed two-component epoxy putty reinforced with anticorrosion steel.
• After mixing the activator and the base, a polymer compound is formed that can be used for repairing, restoring or patching metal parts.
• Easy to use, excludes faults.
• Very high binding strength.

• Consistence (reminds modelling clay) avoids drops and trickles and makes the adhesion of the product to substrate easier.
• After final curing, the material can be bored, sawn, ground, polished and painted.
• Resists water, chemicals and extreme temperatures.
• Does not contain solvents or evaporating agents.

USAGE INSTRUCTIONS

Cut an appropriate amount of material.

Mix the product by kneading it with fingers until achieving a uniform colour. If kneading is difficult, let the product warm up t to a room or a little bit higher temperature. Even mixing is important for achieving a good results.

Apply the product to a repaired surface within 2 minutes after mixing. Press the product to cracks and openings, remove excess material, preferably by using a tool moistened with clean water.

Upon applying the putty to moisture, wet or slowly leaking surface, press the material strongly to the surface and keep pressing until it adheres.

For best result, moisten your fingers in order to make mixing, applying and smoothing of cured product easier. Remove excess material before curing.

TIPS

• Usage temperature between +5 °C and +30 °C.
• The surface should be clean and free of loose particles.
• Roughen the surface to achieve a better and faster adhesion.
•  Moisten your fingers in order to make the mixing, applying and smoothing of the product easier.

LIMITATIONS

• Not suitable for general construction works