PENOSIL
Premium MembraneFix 629 film and membrane adhesive

VALUES

• Adheres to PE, PP, film and various vapour barrier membranes.
• Forms fully airtight connection.
• Does not smell.
• Easy to use.

• Suitable for bonding in interior conditions.
• After curing the adhesive remains plastoelastic and the surface maintains a long-term bond.
• Can be used as contact adhesive, as well as for replacing double-sided tape.

USAGE INSTRUCTIONS

When bonding porous surfaces and a vapour barrier membrane, the adhesive should be applied to the surface which is more porous and the vapour barrier membrane pressed tightly to the adhesive.

To achieve more rapid immediate bonding, the surface with the spread of adhesive should be allowed to dry until it becomes darker and a tacky film layer forms on the surface. The surfaces may then be connected.

Vapour barrier membranes can also be joined to each other. To do this, contact bonding should be used, i.e. the surfaces being bonded should be pressed together and then taken apart.

The surfaces can be connected again once the adhesive has become darker and a dry film has formed on the surface. Leave sufficient clearance for the vapour barrier membrane in order to prevent potential stress caused by deformations, which can cause the tearing of the membrane or the adhesive joint.

In the case of a wool slab, a bonding surface can be formed by means of applying a thin, even layer of film on the slab.

Once the adhesive becomes darker, tape, vapour barrier membranes and similar materials will stick to it effectively. Final curing of the adhesive takes longer, and such a bonding solution assumes that no (additional) load is imposed on the adhesive joint.

TIPS

• Usage temperature between +5 °C to +40 °C.
• The surface must be dry, free from dust, grease and loose particles. The membrane adhesive is not suitable for bonding elements which are loaded. Nor is it suitable for use in areas which are in contact with water. For internal use only.

LIMITATIONS

• The membrane adhesive is not suitable for bonding elements which are loaded.
• Not suitable for use in areas which are in contact with water.
• For internal use only.