PENOSIL
Premium Seal&Fix 709 adhesive sealant with high elasticity

VALUES

• Adheres well to most construction materials.
• Remains permanently flexible.
• Suitable for uneven surfaces.
• Dampens hits and vibration.

• Suitable for alkaline, acidic and metal surfaces.
• Suitable for surfaces that expand, shrink or move by up to 20%.
• Resists mould, UV, ageing, moisture and weather.
• Resists salted and hard water, aqueous household agents, spills of hydrocarbons, dilute acids and bases.

USAGE INSTRUCTION

Cut off the threaded end of the cartridge and screw on the application nozzle for directing adhesive sealant. Cut the threaded end in a way where a suitable opening for application is produced.

Place the cartridge together with the applicator in the gun and fill the installation nozzle with adhesive sealant by repeatedly pressing the gun trigger.

Apply sealant in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle continuously along the joint.

After application of sealant, smooth it with a rubber silicone scraper and remove excess material. Apply the sealant to the surface to be connected and immediately press to the substrate.

When gluing heavy plates, apply adhesive on both surfaces and use a trowel similar to the one designed for applying tile adhesive. Lighter elements should be supported for 2-3 hours, heavy and hanging elements until final curing (curing speed 2,5mm/24h).

TIPS

• Usage temperature between +5 °C and +40 °C.
• The surfaces must be dry and clean from dust, loose particles and oil.
• Ensure adequate ventilation in all joint locations.
• During the curing process, make sure that no impurities can settle on the surface and that the joint surface is not affected by mechanical load.

LIMITATIONS

• Do not use for sealing aquariums and underwater joints.