PENOSIL
Prime&Fix spray adhesive for gluing and priming

VALUES

• Excellent adhesion.
• The adhesive layer is transparent and guarantees an immediate and powerful initial bond.
• Priming substrates ensures a long-lasting and immediate bond for vapour and wind barrier tapes with both porous and non-porous surfaces.
• Can be used at low temperatures.

USAGE INSTRUCTIONS

Before use, shake the dispenser well at least 30 times. Spray the primer on the substrate from 5-10 cm away in a thin layer.
Bonding: After covering the surfaces with adhesive, wait 15–60 seconds, then press the surfaces together. Depending on the substrate, total drying time can be up to 20 minutes. If the adhesive is not used within the next 24 hours, turn the aerosol can upside down and press the applicator a few times to clean out residue. 500 ml is enough to bond about 2 m² of material.
For contact bonding, spray the adhesive on both surfaces to be bonded.
Using as a primer: Let the primer rest for 15-60 seconds before applying the vapour or wind barrier tape. Use a pressure roller on the tape to achieve an optimal bond.
The primer can take up to 20 minutes to dry completely, depending on the substrate.
If the primer is not used within the next 24 hours, invert the aerosol dispenser and press the applicator a couple of times to clean it of residue.
500 ml is enough to prime about 100 m of vapour or wind barrier tape surfaces at a width of 5-10 cm.

TIPS

• Application temperature range: from -5 °C to +35 °C.
• Surfaces must be dry and free of dirt, dust, oil and loose particles.

LIMITATIONS

• Not suitable for bonding PVC or PVC-coated materials.
• Not suitable for EPS, XPS, polystyrene, bitumen, or Teflon surfaces.