PENOSIL
FireStop Intumescent 680 Intumescent sealant for fireproofing

VALUES

• Withstands fire up to 3 hours in a linear joint and up to 4 hours around piping
• Prevents the passage of fire and hot gases
• Halogen, solvent and asbestos free
• Can be painted
• Excellent adhesion on many materials

USAGE INSTRUCTIONS

Cut the tip of the cartridge. Screw on the nozzle and cut an opening at a 45° angle which is slightly larger than the joint to be sealed.

Place the cartridge onto a sealant gun. Apply the sealant by keeping an even pressure at the gun trigger and smoothly dragging the nozzle along the joint.

Remove the excess sealant and smoothen the surface with a suitable tool.

TIPS

• Surfaces to be sealed must be clean, dry and free from any dust, loose particles, oil and old sealant residues. Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth. Excess solvent should be removed with a clean cloth.
• During the curing process, make sure that sealed surfaces stay clean and are not under mechanical stress.
• Due to the wide variety of construction materials, we recommend a preliminary compatibility test. If necessary, surfaces can be primed in order to improve the adhesion.
• Uncured product can be removed with PENOSIL Multipurpose Wipes 943 or water. Cured product can be removed mechanically.
• Application temperature between +5°C and +40°C.

LIMITATIONS

• Cannot be applied on bitumen or on building materials which might bleed oils or plasticisers (e.g. natural rubber, chloroprene, EPDM).
• Does not adhere to polyethylene (PE), polypropylene (PP) or PTFE (Teflon®).
• Do not use at temperatures below +5°C.